Traverse Forum banner
1 - 9 of 9 Posts

· Registered
2019 Premier FWD
Joined
·
201 Posts
Wow, what in the world happened there?

You may be able to do an online search for salvaged parts that match you body color. I am guessing that you will need both the upper part that is missing, and the lower part that is still there (as it looks broken to the left of where that high mount light should be). The light itself may be yet another separate part. It may actually be better to at least visit a body shop and see what they can find for you.

In any event, good luck and let us know what you find.

-RandyMan
 

· Registered
Joined
·
12 Posts
Discussion Starter · #5 ·
Wow, what in the world happened there?

You may be able to do an online search for salvaged parts that match you body color. I am guessing that you will need both the upper part that is missing, and the lower part that is still there (as it looks broken to the left of where that high mount light should be). The light itself may be yet another separate part. It may actually be better to at least visit a body shop and see what they can find for you.

In any event, good luck and let us know what you find.

-RandyMan
Sure!
Most salvaged parts in El Paso don't have. My dealer said that it might be $400 and up because of repainting. So I'm trying to get the same color from salvaged. Do we have the salvaged parts in Las Cruces?
 

· Registered
2019 Premier FWD
Joined
·
201 Posts

· Registered
Joined
·
97 Posts
One daughter has an Envoy. The same "spoiler/extension/lamp" assembly on that was taken off by wind while driving along the highway at about 75. It didn't survive, but the remnants revealed that corrosion got to the four fasteners holding it on, and the sealant didn't have a chance after that. At least yours was due to something other than salt-induced rust. The replacement for that came from the southwest and was about $450.
 
1 - 9 of 9 Posts
Top