Traverse Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
In process of adding a radar detector and have run a 12V power supply wire over to fuse panel under dash on passenger-side.
Will be using an Add-On-Fuse connector.

Anyone know a good fuse location to tap into that's controlled by the key?
 

·
Registered
Joined
·
11,417 Posts
dont even have to run a line..
Since it appears your already handy with wiring---

you simply have to tap into the rear view mirror.
If it has the ONstar buttons- you have 12V power controlled by the key.
You can either find the small pins to connect to the plug and make your own wiring to power the radar detector---- OR you can buy one here.. checkout the link- to get an idea of where to plug into the back..

www.invisicord.com
 

·
Registered
Joined
·
11,417 Posts
Let us know if that helps.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #4
rbarrios said:
dont even have to run a line..
Since it appears your already handy with wiring---

you simply have to tap into the rear view mirror.
If it has the ONstar buttons- you have 12V power controlled by the key.
You can either find the small pins to connect to the plug and make your own wiring to power the radar detector---- OR you can buy one here.. checkout the link- to get an idea of where to plug into the back..

www.invisicord.com


Saw your product to late...already ran the wire across headliner, down the pillar post and over to fuse panel on passenger side. Really wanted to have it fused seperately!
 
1 - 4 of 4 Posts
Top