Traverse Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
11,689 Posts
Here you go....

 

·
Registered
Joined
·
11,689 Posts
by the way- did you get the one with the new bolts?
You should not reuse the original bolts.

These use what are called - torque to yield bolts.
Also- there is a specific sequence to tighten the bolts.
 
  • Like
Reactions: lawrenceaguilusjr

·
Registered
Joined
·
11,689 Posts
 

·
Registered
Joined
·
11,689 Posts
here is the sequence .
1 through 6.

the engine in this pic- is the 3.6 in my 2013 Equinox.
both engines use the same pump.


 
  • Like
Reactions: cintocrunch

·
Registered
Joined
·
11,689 Posts
I should have linked my HOW TO Thermostat....

has info on the hoses etc.
When I did my coolant drain and refill I also did the upper and lower hoses and thermostat. They had not leaked and the thermostat was working fine. But may as well.
the tool to loosen clamps.. and the link to lots more pics on hoses/clamps/ thermostat etc.




 
1 - 5 of 5 Posts
Top