Traverse Forum banner
1 - 7 of 7 Posts

·
Registered
2015 Traverse LT AWD
Joined
·
213 Posts
Looks like the other end of the rivet to me. You should able to tell by touch. I would add a washer to reinforce the back end, (front too if the replacement is not made with strong plastic).

Another thought, why not secure a small metal strip instead of similar plastic piece. The tension of the shade will pull it apart sooner or later after it has been baked under the hot sun or frozen in extreme cold winter for a period of time :unsure:. As you can see there is a crack on the face of the latch....
 

·
Registered
2015 Traverse LT AWD
Joined
·
213 Posts
Worried that I will suffer the same faith. Went out to the parked car and check. My 2015 has a metal latch. No worries for me and can't keep thinking what a way for GM to make more profits.
 
1 - 7 of 7 Posts
Top